GB/T 1483.4-2009 灯头、灯座检验量规 第4部分:杂类灯头、灯座的量规

作者:标准资料网 时间:2024-05-19 00:41:14   浏览:9967   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:灯头、灯座检验量规 第4部分:杂类灯头、灯座的量规
英文名称:Gauges for lamp caps and lampholders—Part 4:Gauges for miscellaneous caps and lampholders
中标分类: 电工 >> 电气照明 >> 灯具附件
ICS分类: 电气工程 >> 电灯及有关装置 >> 灯头和灯座
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-09-30
实施日期:2010-02-01
首发日期:2009-09-30
作废日期:
主管部门:中国轻工业联合会
提出单位:中国轻工业联合会
归口单位:全国照明电器标准化技术委员会
起草单位:全国照明电器标准化技术委员会(SAC/TC 224)
起草人:杜国红、陈欣平、段彦芳、赵秀荣、江姗
出版社:中国标准出版社
出版日期:2010-02-01
页数:84页
计划单号:20072762-T-607
适用范围

GB/T1483的本部分规定了检验杂类灯头和灯座互换性尺寸的量规的型式、尺寸、使用目的及检验方法。
本部分适用于设计和制造用于检验按GB/T1406.4和GB/T19148.4生产的杂类的灯座的量规。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过GB/T1483的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T1031-1995 表面粗糙度 参数及其数值(neqISO468:1982)
GB/T1406.4 灯头的型式和尺寸 第4 部分:杂类灯头(GB/T1406.4-2008,IEC60061-1:2005,Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-Part1:Lampcaps,MOD)
GB/T1957 光滑极限量规 技术条件(GB/T1957-2006,ISO/DP19382:1983,NEQ)
GB/T19148.4 灯座的型式和尺寸 第4 部分:杂类灯座(GB/T19148.4-2008,IEC600612:
2004,Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-Part2:Lampholders,MOD)
IEC60081 双端荧光灯 性能要求

所属分类: 电工 电气照明 灯具附件 电气工程 电灯及有关装置 灯头和灯座
下载地址: 点击此处下载
基本信息
标准名称:全血及成分血质量要求
英文名称:Quality requirements for whole blood and blood components
中标分类: 医药、卫生、劳动保护 >> 医药、卫生、劳动保护综合 >> 医学
ICS分类: 医药卫生技术 >> 医学科学和保健装置综合
替代情况:替代GB 18469-2001
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2012-05-11
实施日期:2012-07-01
首发日期:2001-10-22
作废日期:
主管部门:中华人民共和国卫生部
提出单位:中华人民共和国卫生部
归口单位:中华人民共和国卫生部
起草单位:上海市血液中心
起草人:邹峥嵘、章怿、龚裕春、徐忠、张晰、谢云峥、徐蓓、邱颖婕
出版社:中国标准出版社
出版日期:2012-07-01
页数:20页
适用范围

本标准规定了一般血站提供和临床输注用全血及成分血的质量要求。
本标准适用于一般血站提供和临床输注用全血及成分血。

前言

没有内容

目录

前言 Ⅲ 1 范围 1 2 规范性引用文件 1 3 术语和定义 1 4 血液安全性检测要求 4 5 血液质量控制要求 4

引用标准

下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB14232.1 人体血液及血液成分袋式塑料容器 第1部分:传统型血袋

所属分类: 医药 卫生 劳动保护 医药 卫生 劳动保护综合 医学 医药卫生技术 医学科学和保健装置综合
Product Code:SAE J2313
Title:On-Board Land Vehicle Mayday Reporting Interface
Issuing Committee:Its Council
Scope:This SAE Standard describes the interface between an on-vehicle Mayday detection, reporting system and the off-vehicle response center that will manage the response to the vehicle's call for assistance. The automatic detection and reporting by either the intelligent vehicle itself or by the intelligent roadway of a vehicle that is disabled or involved in an accident, [referred to as Automatic Mayday], is one of the key services identified by the ITS America program plan road map. This effort has been identified, as STD SAE J2313 in recent DOT-FHWA efforts to advance needed National standards. This document primarily addresses the responsibilities of a vehicle in detecting and reporting such an event. Equipment suites on each vehicle will vary widely, as will the communications channel employed to report the incident. This document proscribes a basic methodology to uniformly incorporate whatever level of data reporting the vehicle supports (containing information about both the vehicle condition and any occupant data), and transmits this data to the response management agency in a Nationally standardized format, regardless of the transmission media used to effect the communications. This document has been developed by the SAE ITS In-Vehicle Systems Interfaces Committee (IVSIC) in conjunction with its members, private industry, and various public safety and response agencies at both the State and Federal level. The messages developed here will form a portion of the ITS message list which is being compiled by the SAE ITS ATIS under the SAE J2354 effort and which will be used as the US submission to the ISO TC-204 effort to develop worldwide standards in this area.